Caframo

夹头用于 Crossover 1540 混合机，适配指定轴径的桨叶

夹头钥匙单件，可将夹头牢牢锁紧，固定搅拌轴。. Includes 3 mm hex tool for installation and removal of chuck from mixer’s output shaft. Can also be used to install Caframo Chuck Shaft Guard (CG6).

罩住旋转的夹头与轴，保障安全并防尘. The chuck hex tool is compatible with the bolts included for simple installation. The tough polycarbonate ABS is easy to clean. This guard is included with the purchase of a Caframo Crossover model 1540. Includes Chuck Shaft Guard, hardware and hex key.

搅拌轴直径 9.5 mm（3/8 英寸），轴端车削为 13×8 mm (½ x ⁵⁄₁₆ in) end. Compatible with impeller blades having bores of either 9.5 mm (⅜ in) or 8 mm (⁵⁄₁₆ in) diameter. Shaft is constructed of passivated 316L 不锈钢 for enhanced corrosion protection. 762 mm (30 in) length.

搅拌轴直径 9.5 mm（3/8 英寸），轴端车削为 13×8 mm (½ x ⁵⁄₁₆ in) end. Compatible with impeller blades having bores of either 9.5 mm (⅜ in) or 8 mm (⁵⁄₁₆ in) diameter. Shaft is constructed of passivated 316L 不锈钢 for enhanced corrosion protection. 610 mm (24 in) length.

With the blade welded to the shaft, 桨叶与轴焊接一体，即装即用. No tightening or adjusting set screws is needed, and the one piece impeller is desirable for pharmaceutical, food and other sanitary applications. The three-blade square pitch propeller is 152 mm (6 in) diameter, composed of 316L 不锈钢. Blade is cast, then polished and buffed to a mirror surface finish type #4. The 13 mm (½ in) diameter shaft is constructed of ground …

With the blade welded to the shaft, 桨叶与轴焊接一体，即装即用. No tightening or adjusting of set screws is needed, and the one piece impeller is desirable for pharmaceutical, food and other sanitary applications. The three-blade square pitch propeller is 102 mm (4 in) diameter, composed of 316L 不锈钢. Blade is cast, then polished and buffed to a mirror surface finish type #4. The 13 mm (½ in) diameter shaft is constructed of grou…

This 切向流搅拌桨，适合低速、高粘度混合. The 127 x 254 mm (5 x 10 in) anchor blade is welded to a 9.5 mm (⅜ in) diameter shaft, all 电抛光 316L 不锈钢. Sometimes referred to as a “sweep”, the high shear at the edges makes it a good choice to use close to the vessel wall. Due to the torque required for effective stirring, we recommend the Caframo overhead stirrer BDC1850.

This 切向流搅拌桨，适合低速、高粘度混合. The 127 x 127 mm (5 x 5 in) anchor blade is welded to a 9.5 mm (⅜ in) diameter shaft, all 电抛光 316L 不锈钢. Sometimes referred to as a “sweep”, the high shear at the edges makes it a good choice to use close to the vessel wall.

加配硅胶刮壁片，工艺效果更佳

This 切向流搅拌桨，适合低速、高粘度混合. The 102 x 102 mm (4 x 4 in) ­anchor blade is welded to an 9.5 mm (⅜ in) diameter shaft, all 电抛光 316L 不锈钢. Fits the Sweep accessory covers SW4. The high shear at the edges makes it a good choice to use close to the vessel wall.

折叶涡轮桨，直径 100 mm (4 in) diameter，电抛光 316L 不锈钢. The 8 mm (⁵⁄₁₆ in) bore is compatible with all Caframo shafts. Set screws included. Axial flow with moderate shear for moderate viscosity mixing.